Electric brakes are standard on most caravans and many trailers, and a brake that does not work properly is a serious safety problem. Gateshead Auto Electrics & Air Con installs and repairs electric brake wiring and controllers for 4x4s, utes, caravans and trailers in Newcastle.
How trailer electric brakes work
Each trailer wheel has an electromagnet inside the brake drum. When you brake, a brake controller in the tow vehicle sends current to the magnets, which pull against the drum and slow the trailer. The controller, wiring, plug and magnets all have to work together.
Types of brake controller
- Time-delay controllers: apply a preset amount of braking after the brake pedal is pressed
- Proportional (inertia-sensing) controllers: apply braking in proportion to how hard the tow vehicle slows, which usually feels smoother
Whichever you choose, it needs to be set up for your trailer’s weight, and wired with the correct cable size and a protective fuse or breaker.
Signs your electric brakes need attention
- The trailer pushes or snatches when you brake
- Brakes feel weak or grab unevenly
- The controller shows a fault or no output
- Brakes work on one side only
- Fuses or breakers keep tripping
What causes problems
Corroded plugs and sockets, damaged wiring, worn magnets, poor earth connections and an incorrectly set controller are the usual causes. Many faults can be found with a few electrical tests before any parts are replaced.
Installation and safety
A correct installation uses the right cable, secure connections and a properly fused supply. Brake faults are not something to put off. In Australia, trailers above certain weights must have brakes, and the requirements vary by weight and state, so check with your state road authority if you are unsure.
Our 4×4 dual battery, solar and electric brake service in Newcastle covers controller installs and wiring. For lights, see trailer lights and wiring.
Electric brake questions
Can you fit a brake controller to my 4×4 or ute?
Yes. We supply and fit controllers and the wiring needed for them.
Why do my caravan brakes feel uneven?
Often the controller is set incorrectly, or a magnet, wire or connection on one side is faulty. We test the system to find which.
How often should brakes be checked?
Test them before each trip, and have them inspected if you notice any change in how the trailer stops.
Need electric brakes fitted or repaired?
We are at 6 Skyline Way, Gateshead. We charge by the job, not by the hour.